CARACTERISTICAS:

[AUDIO SECTION]

• Maximum Power : (4 ohms, 1 kHz, 0.7 % THD, for Europe) 160 W + 160 W

• Minimum RMS Output Power : (8 ohms, 20 Hz—20 kHz, 0.02% THD) 90 W + 90 W

(4 ohms, 20 Hz—20 kHz, 0.02% THD) 150 W + 150 W

• Maximum Power : (8 ohms, 1 kHz, 10% THD) 120 W + 120 W

(4 ohms, 1 kHz, 10% THD) 190 W + 190 W

• Dynamic Power/Channel: (8/6/4/2 ohms) 105 W/135 W/190 W/220 W

• Damping Factor : (8 ohms, 1 kHz) 160

Input Sensitivity/Impedance

•         CD, etc. 150 mV/47 k-ohms

•         Phono MM 2.5 mV/47 k-ohms

•         Phono MC 100 ?V/50 ohms

•         Main In 1 V/47 k-ohms

• Frequency Response : CD,etc. to Speaker Out, Flat Position 5 Hz–100 kHz +0 dB/-3 dB

CD,etc. to Speaker Out, Flat Position 20 Hz–20 kHz,+0 dB/-0.3 dB

• RIAA Equalization Deviation : Phono MM 20 Hz–20 kHz, ±0.5 dB

Phono MC 20 Hz–20 kHz, ±0.5 dB

Total Harmonic Distortion

•         (20 Hz–20 kHz) : CD Balanced to Speaker Out 0.01% (90 W/8 ohms)

•         CD, etc. to Speaker Out 0.015% (90 W/8 ohms)

•         Phono MM to Rec Out 0.005% (2 V)

•         Phono MC to Rec Out 0.05% (2 V)

Signal-to-Noise Ratio

•         [IHF-A Network] • CD, etc. (S: 150 mV, Input Shorted) 98 dB

•         Phono MM (S: 5 mV, Input Shorted) 93 dB

•         Phono MC (S: 500 ?V, Input Shorted) 85 dB

•         Residual Noise (CD, etc., IHF-A-Network)

Channel Separation

•         (1 kHz/10 kHz)

•         CD, etc., Input 5.1 k-ohms Terminaled 74 dB/54 dB

•         Phono MM, Input Shorted, Vol: -30dB 90 dB/77 dB

•         Phono MC, Input Shorted, Vol: -30dB 66 dB/77 dB

Tone Control Characteristics

•         Bass Boost/Cut (at 50 Hz) ±9 dB

•         Bass Turnover Frequency 350 Hz

•         Treble Boost/Cut (at 20 Hz) ±9 dB

•         Treble Turnover Frequency 3.5 kHz

• Audio Muting : -20 dB (approx.)

• Load Impedance : Speaker A or B 4 ohms to 16 ohms

Speaker A + B 8 ohms to 16 ohms

Dimensions (W x H x D)

•         435 x 137 x 465 mm

•         17-1/8” x 5-3/8” x 18-5/16”

•         Weight : 22.7 kg 50 lbs.

Las funciones y las especificaciones están sujetas a cambio sin previo aviso